On Sun, 15 Feb 2009 12:56:47 -0700 "W0MU Mike Fatchett" <[email protected]> wrote: > If there is a way to do this already please excuse the request. > > Radio without 2nd receiver > > When working split it would be nice to display your transmit frequency. Say > you have 21.295 for VFO A receiving K5D and VFO B at 21.305 for transmit. > While I see the TX arrow on B it would be nice to see that you were actually > transmitting on 305 on the main display. > > In split mode could it be possible to display the 2nd VFO frequency and be > able to change the vfo with the sub/rit knob. In split I can't recall ever > needing to use the rit feature. > > It would be nice to have immediate control over both vfo's if possible. > > Yaesu has a feature called quick split that put the radio in split mode up 5 > or 10. It was pretty handy. > > > I guess it has been a while since I had a radio that did not have a 2nd > receiver or at least a radio that could listen two places on the same band. > > I have the 2nd receiver kit in the box. It will be installed soon. > > Mike W0MU > > "A slip of the foot you may soon recover, but a slip of the tongue you may > never get over." Ben Franklin > > ______________________________________________________________ >Mike,
While you're right in your assumptioms that all of these other mis-steps can be rectified via software revisions, you can, as I have experienced earlier, that those questions are out here sometimes are MET with ridicule as I've experienced! Jim/nn6ee PS, When that happens obviously the "NEGATIVE COMMENTS" should be thrown in the "GARBAGE!!!" Jim/nn6ee S/N 2406 (K3) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
