Mike the RX ant out is the same as those RF in/out phono sockets found years ago on radios like the Icom IC720A. I use mine to feed a second receiver (Microtelecom Perseus), if you want to feed a second receiver you will need a ferrite splitter which is easy to make, there are three ports, one from the RF out, one back to the K3 and the other to the second receiver. Details halfway down my K3 page at:
http://www.astromag.co.uk/k3/ 73 Dave, G4AON ================ It is also unclear what the real purpose is for the rx ant out. From what I have been told if I want to share my rx antennas with the two receivers then I should use a T or splitter and go to each input separately. I would think that RX Ant Out would allow you to take the RX antenna to another rig or something. If I recall correctly was it to be used for some type of flitering? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
