Mario, No problem here.
73, Don W3FPR Mario Lorenz wrote: > Hello, > > getting finally around to setting up my K3 for RTTY/PSK, > ie. hooking the line in/out to the computer, I noticed that > Line In doesnt work for me. > > - Cables are OK (tested by plugging into MIC IN, the signal > is rather loud but there) > - MICSEL to LineIn, and line level have been tried up to 60 > - Some time ago when I had my K3 open I had done all the mods re. audio > (mainly line out and the gnd mods) . I double-checked and all seems as > per spec... > - Using an ohmmeter to measure into line-in yields 630 ohm which looks > about right as per schematic, so I didnt short-circuit things... > - I updated firmware to 3.10 > > Could someone please confirm that Line In does work with fw rev 3.10 ? > Any further ideas ? > > Mario > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
