According to the author on his web site, K3_EZ does not work with LP-Bridge.
73, Dave AB7E Don Wilhelm wrote: > Bill, > > Multiple applications using the same real serial port is one situation, > but your additional comment about the W2 is (I believe) a different > situation. The W2 needs its own serial port and the K3 needs another. > Perhaps something like the SteppIR controller with its Y cable may be > possible with the W2, but I have my doubts, the SteppIR just listens for > the band frequency information, but the W2 must send data to the computer. > > There are software applications out there (like LP-Bridge) that make a > single serial port into several virtual ports each with its own com address. > > 73, > Don W3FPR > > NZ0T wrote: > >> I'm a computer idiot so I hope this is not too dumb of a question. I >> currently use N3FPR's ACLog using an RS232 cable to a USB adapter cable to >> my laptop. I recently started using K3_EZ and I would like to know if it's >> possible to link both programs to the K3 at the same time using a split >> cable or something like that. It's a pain to exit the logging program when >> I want to use K3_EZ. There is always the chance of acquiring a W2 which also >> has RS232 capability and it would be nice to use it too. >> >> TIA 73, Bill nz0t >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
