Dave, That is true, I pointed out that an application *like* LP-Bridge provides multiple virtual ports. I did not intend to say that any particular application would work with LP-Bridge. There are other similar applications, and some *may* work. Sorry, but I do not have the details about what works and what doesn't. The person with the question might want to do some research knowing that there is a possible solution out there - some experimentation may be required.
73, Don W3FPR David Gilbert wrote: > According to the author on his web site, K3_EZ does not work with LP-Bridge. > > 73, > Dave AB7E > > > > Don Wilhelm wrote: > >> Bill, >> >> Multiple applications using the same real serial port is one situation, >> but your additional comment about the W2 is (I believe) a different >> situation. The W2 needs its own serial port and the K3 needs another. >> Perhaps something like the SteppIR controller with its Y cable may be >> possible with the W2, but I have my doubts, the SteppIR just listens for >> the band frequency information, but the W2 must send data to the computer. >> >> There are software applications out there (like LP-Bridge) that make a >> single serial port into several virtual ports each with its own com address. >> >> 73, >> Don W3FPR >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
