More than likely you have the antenna selection set to something you do not want.
With the sub rx on, HOLD the RX ANT button. This toggles between sharing the antenna with the main RX and the AUX position, which is either the unsued KAT3 antenna or the AUX RF BNC connection...depending how you installed the KRX3. The K3 remembers these selections by band. ------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Wed Jun 3 11:07 , "ON4WIX" sent: >Hi group, > >Running K3 S/N 0192 here. Installed my KRX3 last autumn and up until now all >has been working well. Of course I've only been operating on the lower bands >during winter. >I just noticed that my KRX3 does not work on 12 and 10 metres. Not sure >about 6m since I don't have a dedicated 6m antenna up yet. >I can clearly hear signals in my main receiver on 12 and 10 but when I >switch the KRX3 on my right earpiece goes silent on these bands save for >some thermal noise. >Has this phenomenon anything to do with the known synthesizer ALC >calibration problem as described in the application note "K3 Synthesizer >ALC" Rev A, dated December 23, 2008? > >I would appreciate some info before I start heating up the soldering iron. > >Thanks for any info. > >73 >Glenn ON4WIX / OR4W > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: [email protected]','','','')">[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
