Dick, Thanks. You were correct about the problem. I have a short (3 ft) extender cable connected to the KUSB cable. The junction between the two was slightly loose. I tightened it and loaded OK.
I suspected the K3 because the MCU load always worked. It must be that the FPF load exercised the data lines differently enough to show up the problem. Thanks to you and others for the help. 73, Paul K5ESW > It sounds like you can eventually load, although there is evidence of > substantial communications corruption. > > What sort of cable do you use between the PC and the K3? USB? Hubs > involved? Is it screwed down at the K3 end? If you have alternate cables > available, could you try one of those? If you have several USB ports on > your computer, could you try a different one? > > Dick, K6KR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
