Ok I just found this link: http://www.zerobeat.net/mediawiki/index.php/Cross-Band_Operation
Which leads me to believe I was just on the same band when I saw my radio adeptly switching from one VFO to the other. Man not being able to have a different band on each VFO and easily switch between making contacts on each one really hinders the n1mm/k3/krx3 combo quite heavily. When I bought the KRX3 for FD this year that was one of the major reasons for my purchase... ~Brett On Fri, 2009-06-19 at 23:42 -0700, Brett Howard wrote: > Wow I just tried doing an EE Init and set things up from scratch for the > beginning bit and then gave things a try and I was still unable to get > cross band split to work as it should. This nearly makes using N1MM for > SO2V nearly useless and really degrades the usefulness of the KRX3. Man > I sure hope I can figure this out before FD! I was excited when it was > working before! > > Before I could simply click in the log window for VFO A or on a DX Spot > and poof the TX arrow would point up. Then simply click on a spot in > the VFO B band map and poof you're on that freq and you're TX arrow is > pointing down. Almost felt like a SO2R setup even though it was just > SO2V. > > :( > > ~KC7OTG > > On Fri, 2009-06-19 at 22:42 -0700, Brett Howard wrote: > > I should also state that I swear this was just working a minute ago and > > now I seem to always get SUB N/A unless both VFO's are on the same band. > > > > On Fri, 2009-06-19 at 22:20 -0700, Brett Howard wrote: > > > Right now I've got VFO A on 14.030.00 and VFO B on 7.027.00 and I'd like > > > to transmit on the VFO B freq. Or I'm trying to setup N1MM so that when > > > I click on the VFO B log section that it switches on split so that I can > > > TX in the right band. But I keep getting SPL N/A. I even then tapped > > > A->B twice and then went back to those frequencies and still got SPL > > > N/A. Seems like I'm unable to use the split and TX on VFO B if I'm on > > > independant bands? And yes both are set to CW. > > > > > > Any ideas what I'm doing wrong? > > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
