Whats to say that you couldn't enter into cross band split and then when ever you TX the rig quickly presses A/B then TXes then presses A/B again but simply displays like its TXing w/o moving freqs around and what not. You'd probably not be able to do QSK that way but it would add a really nice flexibility thats not yet already there. I'm somewhat surprised that N1MM hasn't tried to build this functionality in yet.
On Sat, 2009-06-20 at 04:14 -0700, Bill W4ZV wrote: > > > Brett Howard wrote: > > > > Right now I've got VFO A on 14.030.00 and VFO B on 7.027.00 and I'd like > > to transmit on the VFO B freq. Or I'm trying to setup N1MM so that when > > I click on the VFO B log section that it switches on split so that I can > > TX in the right band. But I keep getting SPL N/A. I even then tapped > > A->B twice and then went back to those frequencies and still got SPL > > N/A. Seems like I'm unable to use the split and TX on VFO B if I'm on > > independant bands? And yes both are set to CW. > > > > Any ideas what I'm doing wrong? > > > > Brett remember that the TX signal path in the K3 goes through the BPF and > XFIL for VFO A only (which is why it works on the same band but not cross > bands). To do what you want you need to swap A and B (i.e. touch A/B). > Remember that the KRX3 only adds dual receiver capability...not dual > transmit capability. If someone is waiting for dual transmit capability, > they are in for a very long wait. :-) Of course they could also just buy > another K3 for true SO2R capability. > > 73, Bill > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
