Richard Zwirko wrote: > However, I kept having one minor annoyance. With the K3 in the diversity > mode the VFO's are locked so they track the exact same frequency. More than > a few times during the contest, when I used the RIT, I would accidentily > bump the VFO-B knob. To get VFO-B back to the same frequency required > tapping the A>B button. Is there any reason why the VFO-B knob could be not > be deactivated when the K3 is in the diversity mode? I can think of no > reason why I'd want to tune VFO-B while in this mode. Deactivating VFO-B > would prevent it accidentily unlocking the two VFOs.
It sounds to me as if you were not in diversity mode, but rather LINK mode. If you hold the SUB button for about a second, it links the vfos so that they will tune together. But the frequencies need not be the same. To get diversity mode, hold the SUB button for a longer time until you see DVRSTY on the screen. Then you can use VFO B for a transmit VFO for split operation. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
