Graham, Wes, If I have no input signal, my S-meter behaves as normally expected (S-meter increases with reduced RF Gain), BUT if I am receiving an S-9 signal AND my S-meter is in ABS mode, the behavior is similar to that which you described.
73, Don W3FPR Graham Kimbell (G3TCT) wrote: > Wes, thanks for the insight and it's interesting someone else has the same > problem (s meter behaving oddly when rf gain backed off, plus noisy rx). > > <snip> > > Graham > ----- Original Message ----- > From: "Wes Stewart" <[email protected]> > > "The more you turn RF GAIN back, the higher the S-Meter will read." > > Well, that's the way it should work, but I can assure you that with my K3 > with the factory default RF Gain calibration, turning the control > counterclockwise from max would cause the S-meter to increase at first, then > *decrease* and then increase again as the control reached minimum gain. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
