juergen piezo wrote:
>
> Mark also found that there was less ringing on the Ten Tec Orion's narrow
> DSP filters.
>
Note that:
"The above (Orion) 200Hz and 100Hz DSP filter settings are 227Hz and 155Hz
in reality.
This is a key reason there is less ringing. If I recall correctly, the DSP
50 (lowest setting) in the K3 is actually around 70-80 Hz, which is about
half of the Orion DSP 100 (lowest setting).
73, Bill
--
View this message in context:
http://n2.nabble.com/K3-DIY-DSP-Rev-D-please-elaborate-tp4238598p4241252.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
