Conway, Are you telling me that *that* printing error has not been corrected yet? The printer chopped off part of the component listing in the parts list. Ron (the holder of the documentation) tells me that the master is correct. I discovered this a while ago while trying to use the parts list to locate a misplaced capacitor in a new K2 that I had in here for repair. Sorry it has caused you a problem.
73, Don W3FPR Conway Yee wrote: > Continuing my build of the base K2, I have identified two of the missing > designators in the Appendix A, page 1 0.001 and 0.01 capacitors. C1 and > C2 are 0.001 (102) capacitors as installed on p. 36, right column, 3rd > item. C1, C2 are NOT listed in the Appendix A pages 1-3. > > For the 0.001 uF (102) entry, 28 capacitors are in inventory with 22 > designators listed. Specifically C1 and C2 are not listed. Is there > a list of the remaining capacitors (4) which are 0.001 uF, likely <C37? > > After accounting for the Errata, at total of 38 0.01 uF (103) capacitors > are listed. There are 43 present in inventory the RF board bags for a > total of 5 missing designators. The last item, C175 is followed by a > comma. Further there is a suggestion of a series of 5 commas above the > first line. Is there a list of the 5 missing capacitors, likely <C52 > or >C175? > > Thanks. > Conway Yee, N2JWQ > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
