The K3 tuner does store it's settings in memory but you must transmit in order to get the tuner to change to your frequency. Let's say you're on 80m, all tuned up and hop to 40 meters. If you don't transmit and your reception may be rather weak because the tuner is peaked for 80 meters. I usually hit the ATU tune button and let the tuner switch to it's memory settings. I do this instead of hitting the key and transmitting a full 100 watts. Maybe not necessary but seems like it might be easier on the finals. So yes....you need to transmit somehow to make the ATU change. It doesn't follow along as you spin the dial like ICOMs do. Steve N4LQ ----- Original Message ----- From: "Richard Ferch" <[email protected]> To: <[email protected]> Sent: Wednesday, February 24, 2010 3:48 PM Subject: Re: [Elecraft] Thoughts on internal vs external ATU for K3
> You do *not* have to push the ATU button every time you change bands. > See the firmware release notes for MCU 3.03. > > The ATU remembers the last setting used on each band/antenna input; in > fact, it remembers the setting for every 20 kHz segment (every 10 kHz > segment on 160m, every 50 kHz segment on 10m and every 200 kHz segment > on 6m). > > If you use an external antenna switch, then you may have to push the ATU > button every time you switch antennas on a given band. > > One other thing the KAT3 gives you, by the way, is two antenna inputs, > switchable on the radio, and remembered on a per-band basis. > > 73, > Rich VE3KI > > N8MHD wrote: > >> This isn't true, is it? It's certainly not the case for the K1 or K2 >> tuners, and I can't believe that the K3 is less capable. >> >> Peter N8MHD >> >> >> On Wed, Feb 24, 2010 at 1:52 PM, Steve Ellington <[email protected]> >> wrote: >>> I'm afraid you have the wrong concept of the internal tuner. Every time >>> you >>> change bands, you must push the ATU Tune button. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.733 / Virus Database: 271.1.1/2707 - Release Date: 02/24/10 02:34:00 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
