Have to disagree Don! I have a ladder line fed doublet (with outside balun) attached to Ant 1 and an R7 on Ant 2.
I have Ant 1 set to use the ATU and Ant 2 Bypassed since I don't need the tuner for it. When I switch between Ant 1 and 2 the ATU indicator comes on for 1 and off for 2. Slick! Rick K6LE On 2/24/2010, at 3:36 , Don Wilhelm wrote: > Chuck, > > While you cannot have one antenna set to bypass and the other one for > tuning - there is an easy way to accomplish that. > Since the K2 and K3 tuners remember the settings for each antenna jack > separately, just pre-tune the one you will not use for tuning into a 50 > ohm dummy load. Then when you select that antenna, the tuner is > effectively bypassed. > > In practice, not all antennas are well matched on all bands - and that > is particularly true of electrically short antennas, so you would likely > want tuning on both antennas anyway. > > 73, > Don W3FPR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
