My lovely bride of almost 32 years has recently insisted that I buy a K3 for my belated birthday present, so I did (what a woman). I am starting with the basic kit that includes the 100 watt amp and 2.8Khz and 400Hz Inrad 8 pole filters. That is it. Building the kit was a lot of fun and #3979 is happily on the air.
So far I have serial communications with N1MM Logger so I can change frequencies from the TNC or bandmap window. I am looking for sage advice with respect to keying and audio. I do have a RIGblaster plus here but can I key the rig from the serial cable? So far I have N1MM set for the proper serial port talking to the K3 at 38400-N-8-1-1-DTR and RTS Always On. If I can key it with this cable, I could toss the RIGblaster aside and try some of the recent audio hints I have read here in the last day or so, but please advise on this too if you can. I know I am still pretty unfamiliar with the rig but I hope to get on any way this weekend when I can. It¹s nice to be part of this new family. Thanks for reading this and thanks in advance! -- Steve WU9B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
