On Fri, 05 Mar 2010 12:59:40 -0700, Steve Robinson wrote: >My lovely bride of almost 32 years has recently insisted that I buy a K3 for >my belated birthday present, so I did (what a woman).
The obvious question -- does she have a sister? :) >So far I have serial communications with N1MM Logger so I can change >frequencies from the TNC or bandmap window. I am looking for sage advice >with respect to keying and audio. I do have a RIGblaster plus here but can I >key the rig from the serial cable? What do you mean by "key the rig?" Both PTT and CW can be sent to the serial port by N1MM (CW on DTR, pin 4, PTT on RTS, pin 7), and the K3 can be set to take CW and PTT from those lines. To do that, you must change N1MM from always on or always off to CW and PTT in its Config window for the radio. For audio, see http://audiosystemsgroup.com/HamInterfacing.pdf As noted in an earlier email, I use VOX rather than PTT, but that's a choice. The rig works both ways. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
