I stand corrected. If you want to key the Accessory port FSK input from a RS-232 Tx Data line, you'll need the switch.
Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Brown Sent: Friday, March 05, 2010 12:36 PM To: [email protected] Subject: Re: [Elecraft] N1MM config questions On Fri, 5 Mar 2010 12:29:23 -0800, Dick Dievendorff wrote: >N1MM can activate the PTT and CW keying lines, but you'll need to fashion or >acquire a single-transistor switch (see http://aa5au.com/rttyinterface.html >for examples) for the DTR and/or RTS lines. NO you don''t! The K3 has this stuff built in, and it works great -- there's a menu setting to turn it on and off. Study the menu settings in the manual and you'll find it. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
