Hardy, Something wrong when sending to your email directly
-----Mensaje original----- De: Jorge Diez - CX6VM [mailto:[email protected]] Enviado el: Sábado, 06 de Marzo de 2010 09:12 a.m. Para: 'Hardy Landskov' Asunto: RE: [Elecraft] I cannot TX with Heil connected in the back of the K3 Tks Hardy. Your response was very useful and we got the Heil headset working in the rear. Knew about the rear and front toggle, but not about the Hi-Lo toggle. Also found the bias that needs to be on for some Heils, and off for others 73 Dale at CW5W -----Mensaje original----- De: Hardy Landskov [mailto:[email protected]] Enviado el: Viernes, 05 de Marzo de 2010 05:30 p.m. Para: Jorge Diez - CX6VM Asunto: Re: [Elecraft] I cannot TX with Heil connected in the back of the K3 I had trouble like that too. Could not get the ALC to register on the meter. It turns out the Heil HC4 microphone element is low output. Switch your MIC to rP.H (rear panel) or FP.H (front panel). The H puts in another amplifier for the low output Heil mics. GL N7RT ----- Original Message ----- From: "Jorge Diez - CX6VM" <[email protected]> To: <[email protected]> Sent: Friday, March 05, 2010 10:50 AM Subject: [Elecraft] I cannot TX with Heil connected in the back of the K3 Hello, I connected the Heil with Kenwood adapter in the front of the K3 and the footswitch in the kenwood adapter also and works. I wanted to connect the microphone Heil and the footswitch in the back, so I went to the MENU to select rear connection for the mic, connected mic to "mic mono" and footswitch to "PTT IN" I use an adapter to connect the stereo plug of my Heil footswitch to the RCA in the back of the K3 (PTT IN") With the K3 turned on, when I connected the footswitch in PTT IN the radio went to TX, so I turned it of. Then I turned it on with footswith connected and is OK in RX mode, but doesn´t go to TX when I press the footswitch. What can I do to use the footswitch in the back of the radio? We need the only kenwood adapter we have to use in the TS850, so we have to connect the other Heil (without kenwood adapter) in the back of the K3, both mic and footswitch. Thanks in advance! 73, Jorge CX6VM/CW5W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
