> That message tells you that you do not have the Transmit filter > set correctly - use K3 Utility and set the CW and SSB transmit > filter to the 2.7 (or 2.8) kHz filter.
Also realize that you can not set the default (2.7 or 2.8 KHz) roofing filter to a width other than 2.7 or 2.8 KHz - this is one case where the width must be set accurately. 73, ... Joe, W4TV > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Don Wilhelm > Sent: Saturday, March 06, 2010 6:28 PM > To: Jorge Diez - CX6VM > Cc: [email protected] > Subject: Re: [Elecraft] ERR TXF > > > Jorge, > > That message tells you that you do not have the Transmit filter set > correctly - use K3 Utility and set the CW and SSB transmit > filter to the > 2.7 (or 2.8) kHz filter. If you have the 6 kHz filter, > select it for AM > Transmit, and if the 13 kHz filter, select it for FM transmit. > > 73, > Don W3FPR > > Jorge Diez - CX6VM wrote: > > Hello, > > > > > > > > I have a ERR TXF message in the display of the K3 when I > hold TUNE or > > when I press XMIT. > > > > > > > > Also I cannot do the calibrate transmitter gain in the utility > > software because of this TXF > > > > > > > > Any idea what´s wrong? > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
