Thanks to all for the help. So seems I need to know how to seup filters. I see in the utility program about "Configure Cristal Filters, but I don´t know what I need to put there in my case.
I have the 400 hz and the 1.8 khz in the mail and the same filters in the subRX, so I have four filters, 2 x 400hz and 2 x 1.8khz Thanks! 73, Jorge CX6VM -----Mensaje original----- De: Don Wilhelm [mailto:[email protected]] Enviado el: Sábado, 06 de Marzo de 2010 09:28 p.m. Para: Jorge Diez - CX6VM CC: [email protected] Asunto: Re: [Elecraft] ERR TXF Jorge, That message tells you that you do not have the Transmit filter set correctly - use K3 Utility and set the CW and SSB transmit filter to the 2.7 (or 2.8) kHz filter. If you have the 6 kHz filter, select it for AM Transmit, and if the 13 kHz filter, select it for FM transmit. 73, Don W3FPR Jorge Diez - CX6VM wrote: > Hello, > > > > I have a ERR TXF message in the display of the K3 when I hold TUNE or when I > press XMIT. > > > > Also I cannot do the calibrate transmitter gain in the utility software > because of this TXF > > > > Any idea what´s wrong? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
