Help! I have K3 #2100. On CW power is very stable, but not on SSB. There is some change on output power, it is not constant.
If I tune my linear (Titan) on CW with 50 W, output is stable 1500 W. but on SSB with the same driving power I get only about 1200 W? If I whistle to mic it takes about 2-3 seconds and power rising to 1500W. Titan has peak power meter and I have also Bird 43. I have tested also to 50 ohm dummy load and without linear, with and without tuner. Really, power is first about 80 W and then it go to 100 W very slowly on SSB. TXG VCE has no effect. Why? Is that normal behavior of K3? I have latest firmware, today loaded. I think it is like ALC react too much and too quickly. 73 de Juha - oh6os ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
