I will do the gain calibration again when I get home. I have done this several times in the past without improvement, but not terribly recently. Maybe there is a relatively recent firmware improvement in this area? Would it be possible to change the firmware to not reset the ALC when doing a band change without transmitting on the other band? I have a habit of using the A/B button to take a quick peek on 10m, then coming back if there is nothing there.
AB2TC - Knut Joe Subich, W4TV-4 wrote: > > >> No, please, this is not a power calibration issue! > > Bull ... I have seen it and can recreate it at will. > > If the wattmeter is not properly calibrated and the > transmit gains are off, the bower setting routines > do not act correctly. With the transmitter properly > calibrated I see less than .5dB "undershoot" (more > than 95 W when commanded for 100W) when changing bands. > > <snip> > > -- View this message in context: http://n2.nabble.com/K3-power-output-on-SSB-tp4818879p4824395.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
