Fabio: What steps did you take to install the vanilla kernel 2.6.26.2 from kernel.org and get the em28xx-new drivers working in Fedora 9? I've struggled with getting the mcentral drivers to work with Fedora 9 for weeks now with no such luck.
I have a Pinnacle 800e that used to work with Markus' drivers (FC6); Kernel 2.6.26 supposedly has support for my other tvtuner - the Pinnacle 801e (I'm assuming this will work out of the box?). For the time being I have been using the "video4linux" package available through "yum". The current kernel available through "yum" is like 2.6.25.14-108 (I think); so I'm not sure how to upgrade to 2.6.26. Thanks, Scott > Message: 5 > Date: Thu, 21 Aug 2008 23:41:37 +0200 > From: Fabio Venturi <[EMAIL PROTECTED]> > Subject: Re: [Em28xx] Fwd: Short FC9 "em28xx-new" > HOWTO > To: Lista em28xx <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > On Mon, Aug 18, 2008 at 12:08:14PM +0200, Miroslav Pragl > wrote: > > Please make sure you have > /lib/modules/<yourkernelversion>/build linked > > to kernel you just prepared! > > > > MP > > Hi, > I've solved the problem using a kernel from kernel.org > now I'm running 2.6.26.2 version and em28xx-new compile > just fine. Now I can see DVB-T and analog TV very well, > thank you again for the great work! > Next step will be IR setup, in case you need it, that's > my dmesg: > > hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 > ehci_hcd 0000:00:03.3: GetStatus port 4 status 001803 POWER > sig=j CSC CONNECT > hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms > status 0x501 > ehci_hcd 0000:00:03.3: port 4 high speed > ehci_hcd 0000:00:03.3: GetStatus port 4 status 001005 POWER > sig=se0 PE CONNECT > usb 1-4: new high speed USB device using ehci_hcd and > address 4 > ehci_hcd 0000:00:03.3: port 4 high speed > ehci_hcd 0000:00:03.3: GetStatus port 4 status 001005 POWER > sig=se0 PE CONNECT > usb 1-4: default language 0x0409 > usb 1-4: uevent > usb 1-4: usb_probe_device > usb 1-4: configuration #1 chosen from 1 choice > usb 1-4: adding 1-4:1.0 (config #1, interface 0) > usb 1-4:1.0: uevent > drivers/usb/core/inode.c: creating file '004' > usb 1-4: New USB device found, idVendor=2040, > idProduct=6502 > usb 1-4: New USB device strings: Mfr=0, Product=1, > SerialNumber=2 > usb 1-4: Product: WinTV HVR-900 > usb 1-4: SerialNumber: 4028523360 > Linux video capture interface: v2.00 > em28xx v4l2 driver version 0.0.1 loaded > em28xx 1-4:1.0: usb_probe_interface > em28xx 1-4:1.0: usb_probe_interface - got id > em28xx: new video device (2040:6502): interface 0, class > 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: tvp5150 detected. > tvp5150 1-005c: tvp5150am1 detected. > successfully attached tuner > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > input: em2880/em2870 remote control as /class/input/input8 > em28xx-input.c: remote control handler attached > em28xx #0: Found Hauppauge WinTV HVR (B2C0) > usbcore: registered new interface driver em28xx > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > Em28xx: Initialized (Em28xx Audio Extension) extension > tvp5150 1-005c: tvp5150am1 detected. > > best regards, > > -- > Fabio Venturi _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
