I'd always seen delays like this in opening CE & when sorting by a different column. It seems best to leave it sorted by date, the others are slower for daily use. My emailer mail db is typically around 300MB.
If you delete most of your emails, you'll find emailer a lot faster, but I'm not actually recommending that! Computer speed & amount of ram allocated to Emailer can make a difference. So can disk fragmentation. Best, Dave Nathanson in reply to ([EMAIL PROTECTED]), temporarye2002's message of 5:43 PM, 11/30/04 >Hi y'all, > >I did my annual "typical rebuild" of my 55mb data base >(version 2.0v3) before copying the entire Emailer File >folder (and prefs!) to my backup iBook, which already >had 2 copies of Emailer. One copy is used by my wife, >and the other is there for times like this, when my >primary iBook goes to the shop. I swapped my Emailer >Files folder and prefs into the copy 2 of Emailer (and >the other copy also has its prefs in the Emailer >folder. Alls well except: > >When I start up my copy of Emailer, there is a 7 >second delay in starting up. The delay starts just >after the tool bar (actually just an empty outline of >it) forms, before the browser shows up. During these >7 seconds the entire computer freezes (clock doesn't >move) and then all is fine. The only other oddity is >that when in the browser I change ordering from Date >to From/To, the delay is about twice as long as usual, >which has always had an about 4-5 second delay. > >Just in case, I did another data base rebuild, but >noticed no reduction in the start up delay. > >Any ideas? > >-Gabriel ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
