Hi Alex, I have the RS274NGC side sorted now and it switches modes with G07/G08. These two codes are now in modal group 15 and should set a flag in active_g_codes. I haven't done much testing yet but so far all seems well.
Now to try to get Axis to display the G07/G08 state. Looks like I need to learn tcl/tk... > Btw, it would be really nice if you would step by #emc-devel at > irc.freenode.net, you'll get much faster feedback that way. > I tend to prefer email because I can fire of an email then go away and do something else. This list seems to respond very quickly anyway. Thanks, Les Alex Joni wrote: > Well (imo - not always the best opinion) one way to do it is like this: > make the g-code you switch modal, add them to the active g-codes list, > then patch the GUI to read that and show an appropriate message. > The later part can be something someone else might help with, doing the > first part should be enough of a learning experience for you ;) > Btw, it would be really nice if you would step by #emc-devel at > irc.freenode.net, you'll get much faster feedback that way. > > Regards, > Alex > > ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
