Therfor G64 Pxxx is in use if you say this the mashine will think 3 Lines ahead and then correct the pat by the giben value 0.05mm will give you 95% of velocity at the programmed path
Am 06.01.2012 05:37, schrieb Jon Elson: > I just had somebody ask me about contouring performance of EMC2. > I spotted something in the user manual I had never seen before, section > 3.1.4, that says that no move can ever go fast enough that the machine > cannot stop at the end of the move. This seems like it will significantly > slow down contouring where many very short vectors occur in a row. > > Is this still true (I know Michael has been working a lot in the T.P. > lately)? > > I know that there are dangers if you only are looking ahead one > move, is there some plan to extend the T.P. to allow higher speeds > in this sort of contouring? > > Thanks, > > Jon > > ------------------------------------------------------------------------------ > Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex > infrastructure or vast IT resources to deliver seamless, secure access to > virtual desktops. With this all-in-one solution, easily deploy virtual > desktops for less than the cost of PCs and save 60% on VDI infrastructure > costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
