This is how I understand it. Emc only looks 1 segment ahead for blending. (I think cutter comp may look a little further for checking on gouging but that is just a feeling)
g61 - exact stop mode. (self explanatory) g64 - constant velocity. It will go as fast as it can while still touching every line segment/arc. g64 px.xxx - this blends line segments and arcs that fit within that tolerance. In effect the segments get longer so the effective cutting speed increases.. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TrajectoryControl sam On Fri, 06 Jan 2012 11:43:25 -0600 Jon Elson <el...@pico-systems.com> wrote: > Sammel Lothar wrote: > > Therfor G64 Pxxx is in use > > if you say this the mashine will think 3 Lines ahead and then correct > > the pat by the giben value 0.05mm will give you 95% of velocity at > > the programmed path > > > So, using G64 Pxx allows it to look ahead 3 lines? Are you sure about this? > That seems to conflict with the documentation. But, I know Michael has > been doing significant work in the T.P. area. Does this apply to 2.5 only, > or 2.4.x? > > Thanks, > > Jon > > ------------------------------------------------------------------------------ > Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex > infrastructure or vast IT resources to deliver seamless, secure access to > virtual desktops. With this all-in-one solution, easily deploy virtual > desktops for less than the cost of PCs and save 60% on VDI infrastructure > costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
