On Sat, 15 Feb 2014 13:54:50 +0100, Michael Haberler <[email protected]> wrote: > Hi Frederic, > > Am 15.02.2014 um 12:30 schrieb Frederic RIBLE <[email protected]>: > >> >> I have a problem with current "lucid master-rt": after homing, if I try
>> to run a MDI command, the interpreter is stucked in readline state and >> the machine does not move. >> The problem is sporadic: if I restart several times LinuxCNC, I can >> sometimes have a running machine (I would say 1 good run from 10 tries). >> Looks like a real-time issue at startup. > >> Everything was ok few weeks ago with previous buildbot releases. >> Also, everything is ok with current "lucid scratch-rt" >> >> Any clue ? > > not without more details > > could you share the configuration which you're using? > also helpful: the output of 'linuxcnctop' pastebin'ed after this happens > > - Michael > >> Frederic. >> Michael, thanks. Here is some more detail. I am running pre0.5184 My config is here: http://blog.f1oat.org/wp-content/uploads/2013/11/CNC-6040-2014-02-16.tar.gz And the output of linuxcnctop below. Frederic. acceleration 1e+99 active_queue 1 actual_position 633.0000 410.0000 92.0000 0.0000 adaptive_feed_enabled 0 ain 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 angular_units 1.0000 aout 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 axes 4 axis_mask 15 block_delete 0 command G0 X320 current_line 0 current_vel 0.0000 cycle_time 0.00098865 debug 0 delay_left 0.0 din 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 distance_to_go 4.0801 dout 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dtg -4.0801 0.0000 0.0000 0.0000 echo_serial_number 5 enabled 1 estop 0 exec_state done feed_hold_enabled 1 feed_override_enabled 1 feedrate 1.0 file /home/f1oat/linuxcnc/configs/CNC-6040/nc_files/axis.ngc flood 0 g5x_index 1 g5x_offset 308.9199 170.0000 92.0000 0.0000 g92_offset 0.0000 0.0000 0.0000 0.0000 gcodes G0 G17 G40 G21 G90 G94 G54 G49 G99 G64 G97 G91.1 G8 homed 1 1 1 1 id 0 inpos 0 input_timeout 0 interp_state reading interpreter_errcode 0 kinematics_type identity limit 0 0 0 0 linear_units 1.0000 lube 1 lube_level 0 max_acceleration 1e+99 max_velocity 0.0000 mcodes M5 M9 M48 M53 M0 mist 0 motion_line 0 motion_mode coord motion_type traverse optional_stop 0 paused 0 pocket_prepped -1 position 633.0000 410.0000 92.0000 0.0000 probe_tripped 0 probe_val 0 probed_position 0.0000 0.0000 0.0000 0.0000 probing 0 program_units mm queue 1 queue_full 0 queued_mdi_commands 0 read_line 0 rotation_xy 0.0000 settings 0.0 0.0 0.0 spindle_brake 1 spindle_direction 0 spindle_enabled 0 spindle_increasing 0 spindle_override_enabled 1 spindle_speed 0.0 spindlerate 1.0 state rcs_exec task_mode mdi task_paused 0 task_state on tool_in_spindle 0 tool_offset 0.0000 0.0000 0.0000 0.0000 velocity 0.0 ------------------------------------------------------------------------------ Android apps run on BlackBerry 10 Introducing the new BlackBerry 10.2.1 Runtime for Android apps. Now with support for Jelly Bean, Bluetooth, Mapview and more. Get your Android app in front of a whole new audience. Start now. http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
