Le 2014-02-16 21:32, Frederic Rible a écrit : > > Michael, thanks. > Here is some more detail. > > I am running pre0.5184 > My config is here: > http://blog.f1oat.org/wp-content/uploads/2013/11/CNC-6040-2014-02-16.tar.gz > > And the output of linuxcnctop below. > Frederic. > > acceleration 1e+99 > active_queue 1 > actual_position 633.0000 410.0000 92.0000 0.0000 > adaptive_feed_enabled 0 > ain 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > angular_units 1.0000 > aout 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 > axes 4 > axis_mask 15 > block_delete 0 > command G0 X320 > current_line 0 > current_vel 0.0000 > cycle_time 0.00098865 > debug 0 > delay_left 0.0 > din 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > distance_to_go 4.0801 > dout 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > dtg -4.0801 0.0000 0.0000 0.0000 > echo_serial_number 5 > enabled 1 > estop 0 > exec_state done > feed_hold_enabled 1 > feed_override_enabled 1 > feedrate 1.0 > file /home/f1oat/linuxcnc/configs/CNC-6040/nc_files/axis.ngc > flood 0 > g5x_index 1 > g5x_offset 308.9199 170.0000 92.0000 0.0000 > g92_offset 0.0000 0.0000 0.0000 0.0000 > gcodes G0 G17 G40 G21 G90 G94 G54 G49 G99 G64 G97 G91.1 G8 > homed 1 1 1 1 > id 0 > inpos 0 > input_timeout 0 > interp_state reading > interpreter_errcode 0 > kinematics_type identity > limit 0 0 0 0 > linear_units 1.0000 > lube 1 > lube_level 0 > max_acceleration 1e+99 > max_velocity 0.0000 > mcodes M5 M9 M48 M53 M0 > mist 0 > motion_line 0 > motion_mode coord > motion_type traverse > optional_stop 0 > paused 0 > pocket_prepped -1 > position 633.0000 410.0000 92.0000 0.0000 > probe_tripped 0 > probe_val 0 > probed_position 0.0000 0.0000 0.0000 0.0000 > probing 0 > program_units mm > queue 1 > queue_full 0 > queued_mdi_commands 0 > read_line 0 > rotation_xy 0.0000 > settings 0.0 0.0 0.0 > spindle_brake 1 > spindle_direction 0 > spindle_enabled 0 > spindle_increasing 0 > spindle_override_enabled 1 > spindle_speed 0.0 > spindlerate 1.0 > state rcs_exec > task_mode mdi > task_paused 0 > task_state on > tool_in_spindle 0 > tool_offset 0.0000 0.0000 0.0000 0.0000 > velocity 0.0 > > > > ------------------------------------------------------------------------------ > Android apps run on BlackBerry 10 > Introducing the new BlackBerry 10.2.1 Runtime for Android apps. > Now with support for Jelly Bean, Bluetooth, Mapview and more. > Get your Android app in front of a whole new audience. Start now. > http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
Very strange. I have pulled the last master release source code, compiled it and run in place. Everything seems ok. I do not understand why I have regression issues with last buildbot packages. May be something in my environment that is not compatible with recent automatic builds. I continue my analysis. Frederic. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
