Le 2014-02-19 22:24, Frederic RIBLE a écrit : > Le 2014-02-16 21:32, Frederic Rible a écrit : >> Michael, thanks. >> Here is some more detail. >> >> I am running pre0.5184 >> My config is here: >> http://blog.f1oat.org/wp-content/uploads/2013/11/CNC-6040-2014-02-16.tar.gz >> >> And the output of linuxcnctop below. >> Frederic. >> >> acceleration 1e+99 >> active_queue 1 >> actual_position 633.0000 410.0000 92.0000 0.0000 >> adaptive_feed_enabled 0 >> ain 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> angular_units 1.0000 >> aout 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 >> axes 4 >> axis_mask 15 >> block_delete 0 >> command G0 X320 >> current_line 0 >> current_vel 0.0000 >> cycle_time 0.00098865 >> debug 0 >> delay_left 0.0 >> din 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >> distance_to_go 4.0801 >> dout 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >> dtg -4.0801 0.0000 0.0000 0.0000 >> echo_serial_number 5 >> enabled 1 >> estop 0 >> exec_state done >> feed_hold_enabled 1 >> feed_override_enabled 1 >> feedrate 1.0 >> file /home/f1oat/linuxcnc/configs/CNC-6040/nc_files/axis.ngc >> flood 0 >> g5x_index 1 >> g5x_offset 308.9199 170.0000 92.0000 0.0000 >> g92_offset 0.0000 0.0000 0.0000 0.0000 >> gcodes G0 G17 G40 G21 G90 G94 G54 G49 G99 G64 G97 G91.1 G8 >> homed 1 1 1 1 >> id 0 >> inpos 0 >> input_timeout 0 >> interp_state reading >> interpreter_errcode 0 >> kinematics_type identity >> limit 0 0 0 0 >> linear_units 1.0000 >> lube 1 >> lube_level 0 >> max_acceleration 1e+99 >> max_velocity 0.0000 >> mcodes M5 M9 M48 M53 M0 >> mist 0 >> motion_line 0 >> motion_mode coord >> motion_type traverse >> optional_stop 0 >> paused 0 >> pocket_prepped -1 >> position 633.0000 410.0000 92.0000 0.0000 >> probe_tripped 0 >> probe_val 0 >> probed_position 0.0000 0.0000 0.0000 0.0000 >> probing 0 >> program_units mm >> queue 1 >> queue_full 0 >> queued_mdi_commands 0 >> read_line 0 >> rotation_xy 0.0000 >> settings 0.0 0.0 0.0 >> spindle_brake 1 >> spindle_direction 0 >> spindle_enabled 0 >> spindle_increasing 0 >> spindle_override_enabled 1 >> spindle_speed 0.0 >> spindlerate 1.0 >> state rcs_exec >> task_mode mdi >> task_paused 0 >> task_state on >> tool_in_spindle 0 >> tool_offset 0.0000 0.0000 0.0000 0.0000 >> velocity 0.0 >> >> >> >> ------------------------------------------------------------------------------ >> Android apps run on BlackBerry 10 >> Introducing the new BlackBerry 10.2.1 Runtime for Android apps. >> Now with support for Jelly Bean, Bluetooth, Mapview and more. >> Get your Android app in front of a whole new audience. Start now. >> http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers > Very strange. > I have pulled the last master release source code, compiled it and run > in place. > Everything seems ok. > I do not understand why I have regression issues with last buildbot > packages. > May be something in my environment that is not compatible with recent > automatic builds. > I continue my analysis. > Frederic. > > > > > > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
I am now running pre0.5189 One clue: I have tested with default configurations coming with the lucid package. * sim/axis : ok * sim/gscreen : ok * sim/gmoccapy : MDI stucked I believe I am not far from understanding the root cause ! Stay tuned. Frederic. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
