yea sure Gene ridgid tappng is next on the list and auto tool measuing with toolchanger interface so it knows when a tool is replaced in the toolchanger to re-measure and update tooltable problem i have is changing from machine to running gcode and storing positional info so it can store position , then go and do the tool remeasuring and update , thats where it gets screwed ! haha
On 11 September 2014 12:42, Gene Heskett <ghesk...@wdtv.com> wrote: > On Thursday 11 September 2014 07:09:16 David Armstrong did opine > And Gene did reply: > > ok Guy's this has me at the moment > > > > i wish to switch a relay at a low speed set by the running gcode S > > value ? ( say 500 rpm) > > i had briefly thrown it at Andy via email and one of his suggestions > > was remaping > > i had a look at the wiki and the spinde remaping is TBD > > > > i had thought of monitoring the encoder or motion , but checking for a > > speed , or if speed > > etc , i can't see any particular similar code or idea > > > > has anyone done anything similar > > i'd prefer to keep it in the hal if possible rather than remap , but if > > thats a way then fine > > In one of my lathe configs, all hal software, not 5i25, I have a couple > instances of wcomp, one of which is watching the encoder velocity output, > to run the staging of a pair of relays that control the loading for > dynamic braking. I also have in that config, the ability to synthesize a > stop signal for the turnaround stop when an m3/m4 or vice versa is done by > the planner while running the G33.1 rigid tapping cycle. They do not > detect the stopped condition, I used a one shot watching an encoder A > phase for that. Complex indeed, but it worked well enough that I used it > to peck tap several holes with it on a pure parport & cnc4pc BOB only > setup. > > If you are interested in looking at my idiocy, David, I can PM it. Well > organized its not. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS > > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce > Perforce version control. Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
