nicklas hello kerosene may sound scary but it is good if the sparks are 20mm below surface of kerosene i used it for fine finishes instead of 'real edm fluid'
if you can find 'white spirits' or slightly heavier parafinic it is better quite simply the oils suitefd to sink edm are in a narrow range when in the cracking tower edm fluid is hard to find in small quantities possibly, contact local OelHeld office for a litre or two as free sample tell them your intention read the OelHeld literature to see common names for oils suited to EDM btw: water works well too. i ran stock sinkers with plastic tubs inside work tank to test for GE titanium turbines at 150 amp ruffing ( messy grey foam but it worked ;-) not even DI water! tomp On 03/10/2016 12:42 AM, Nicklas Karlsson wrote: >> Hi Nicklas: >> Before it became clear that modern EDM technology is pretty darn >> complex, >> was your intention more along the lines of motion control software for EDM or >> are you in for the whole adventure? > Hole adventure but it does not have to be a good EDM machine with todays > standard. Then it come to machine dynamics I will however spend more time. > > As is now motion control work and hopefully there will be most software which > is rather small before I could machine my first piece of scrap. The thing > that worry me most is the fluid, I read it is kerosene, there are high > currents and pumps with not to low pressure so what could possible go wrong? > > Regards Nicklas Karlsson > > ------------------------------------------------------------------------------ > Transform Data into Opportunity. > Accelerate data analysis in your applications with > Intel Data Analytics Acceleration Library. > Click to learn more. > http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
