On Saturday 15 April 2017 19:17:23 Gene Heskett wrote: > On Saturday 15 April 2017 06:29:22 Phillip Carter wrote: > > I have just noticed in sim/axis/gantry that joint 3 does not jog > > with the leftbracket/rightbracket keyboard keys but does with the > > minus/equals keyboard keys. Is this the correct behaviour? > > I also, for lack of anything better to do, rigged up my chop saw and > sawed off a couple hunks on 1.5" thick alu to make a new set of > bearing pushers to fit the larger OD of the correct bearing. Fired up > linuxcnc -l, (this after an early morning update of LinuxCNC-2.8-pre > to LINUXCNC - 2.8.0-pre1-2988-ge9f9469) x and z are still swapped at > the keyboard yet before being homed. Hit ctl+home, and it homed to the > correct places, and in the correct directions and homeing order. > Tapped the uparrow, then downarrow, and z moves left-right. Tapped > the left and right arrows, and x moves in and out. Switch to MDI, and > its now scrambled as well, as in G0X moves Z and G0Z moves X. So it > appears Phillips commit made the keyboard scramble apply to MDI too, > which means it cannot run code I ran on it just 2 days ago. > > Help! I do not have another functioning lathe now. > > Can you back out Phillips commit and retrigger the buildbot? It at > least ran correctly after being homed, and I could use it, once it had > been homed. > > Thanks guys. > > Cheers, Gene Heskett
Touring what could have been hell, I just installed that version on both of my mills, and things appear to be working as expected on all 7 axis's they have. So this seems to be a lathe only problem. That should help narrow the search. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers