On Sunday 16 April 2017 01:53:39 Phillip wrote: > > For a lathe JOG_AXES=ZX would be best and is the default if not > > specified. See extract from > > http://linuxcnc.org/docs/devel/html/config/ini-config.html#_display_ > >se ction > > I just found that about half an hour ago, on at least the 3rd or 4th > read before it sank in. > > I believe it may be fixed now. I'll find out for sure come daytime > again. Thanks Phillip, for not calling me an idiot who can't RTFM. > > > * > > > > /JOG_AXES =/- The order in which jog keys are assigned to axis > > letters. The left and right arrows are assigned to the first > > axis letter, up and down to the second, page up/page down to the > > third, and left and right bracket to the fourth. If unspecified, the > > default is determined from the [TRAJ]COORDINATES, [DISPLAY]LATHE and > > [DISPLAY]FOAM values. > > Cheers, Gene Heskett
The fix was temporary, I had been watching it while fineing up the size of the bolt hole thru a block of alu, thinking it ought to be big enough for the bolt (it was) but something happen inside the motor doghouse just as I slid the feed override to 0. I keep forgetting to re-engage the backgear, so the pid spins the motor wide open when the spindle doesn't turn, so I had put a 100 millisecond timer, retriggerable, netted to shut the motor drive off again by disabling the machine if an encoder pulse has not been rx'd within the timeout. And thats where I am. So I've got to wrestle the wheeled toolbox its sitting on, back out of its cubby hole, and uncover the doghouse to see whats happened. I've had so much alu swarf flying around I will not be surprised to find a curly bit of it someplace its not supposed to be. But Easter Sunday dinner awaits, by baby felt like doing some of the cooking today. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
