Dewey, Updates does not seem to be working, I am still getting a nak when trying: set home -1
Looks like it should not be rejected just for being equal to -1. How does teleop get enabled, by the home sequence, or must it be set manually? Thanks, Eric On August 24, 2017 8:23:24 PM EDT, "Eric H. Johnson" <ejohn...@camalytics.com> wrote: >Cross posting to EMC-Developers > >Dewey, > >Thanks for that. I probably should have started this thread on the >developer >list. I will test it tomorrow. > >Regards, >Eric > > > >> Also, I cannot jog over linuxcncrsh ... > >Updating the master branch for improved >joints-axes functionality necessitated changes to linuxcncrsh jogging >to >support both axis coordinate jogging (TELEOP_MODE) and joint jogging >(not >TELEOP_MODE). > >In general, changes for the master branch are described in the >"Updating >LinuxCNC" section of the devel docs: >http://linuxcnc.org/docs/devel/html/getting-started/updating-linuxcnc.html > >Linuxcncrsh is specifically included at para 7.9 of: >http://linuxcnc.org/docs/devel/html/getting-started/updating-linuxcnc.html#_ >linuxcncrsh > >The linuxcncrsh man page has also been updated to some degree for >jogging >methods: > >http://linuxcnc.org/docs/devel/html/man/man1/linuxcncrsh.1.html > >Because there are few users, the changes for linuxcncrsh have been >lightly >tested. >-- >Dewey Garrett > > >---------------------------------------------------------------------------- >-- >Check out the vibrant tech community on one of the world's most >engaging tech sites, Slashdot.org! http://sdm.link/slashdot >_______________________________________________ >Emc-users mailing list >emc-us...@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users > > >------------------------------------------------------------------------------ >Check out the vibrant tech community on one of the world's most >engaging tech sites, Slashdot.org! http://sdm.link/slashdot >_______________________________________________ >Emc-users mailing list >emc-us...@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
