Ok makes sense. I found the datapainter.vhd in the hostmot2 source code downloaded from mesanet. Doesn't look like it is in the linuxcnc git yet.
On Tue, Jun 26, 2018 at 11:31 AM, andy pugh <bodge...@gmail.com> wrote: > On 26 June 2018 at 02:30, Curtis Dutton <curtd...@gmail.com> wrote: > > Peter that sounds great. Can I get some links into the relevant pieces? > I'm > > willing to work on this, and add to the hm2 driver, do some testing and > get > > something going after I finish my man pages. I have a 6i25 and a smart > > serial IO card in my laser so I can test as I develop. > > I think this is unrelated to the smart-serial stream datatype. (So > your smart-serial board is not relevant) > > The files that would need to be altered would be the same ones as were > altered to add led support (I choose that one as being a very simple > patch for a very simple feature). > > https://github.com/LinuxCNC/linuxcnc/commit/920b18a1e3c278c30ab5b99ad0e441 > fbbc2010b9 > > Basically a new driver file, adding that to the makefile and a few > changes in hostmot2.c / .h to recognise the tags and to know what to > do with them. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers