2018-06-29 23:59 GMT+03:00 Gene Heskett: > Greetings all; > > Because it was handy, my tool length contact bit of pcb is pretty close > to the workpiece, like maybe a fat 1/16" from it. The lack of a debris > vacuum during the drilling and tapping operations allows quite a pile of > swarf to build up, leading to "probe tripped while some other motion was > in progress" errors and machine stoppages. It seems to me there ought to > be some way short of a manual switch to disable this when there is no > g38.x being executed. > > But short of a custom M command to set an and2 to disable it, wrapped > around the g38.x so its only live when running the g38.x, I don't see > how else to do it. Is there a simpler way? >
Hi Gene! I think you can use motion.motion-type for the logic. http://linuxcnc.org/docs/html/man/man9/motion.9.html Only enable the probe input when motion-type is 5. Cheers, Andrew ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
