Hello, all, merry Christmas and a happy new year!
I've got a user who downloaded the latest (looks like
development head), shows on screen
as 2.9.0, and he's using a PCIe parallel port at d010. He
gets the following message both in the log file
and on the Axis screen. 53264 decimal = d010 hex. The
parallel port is TRULY there, as
the system communicates with my PWM controller over it. So,
the message is totally
spurious. I have seen this on other systems but have just
been ignoring it. The message
"Linux parallel port" is not present in my hal_ppmc.c
driver, it comes from the code that
manages reserving the parallel ports. I'm pretty sure this
message does NOT come out
when using motherboard ports at 0x378. We specify the port
address in the loadrt command
line for the hal_ppmc driver.
Debug file information:
Note: Using POSIX realtime
PPMC: bus 0 epp_dir = 0
Linux parallel port @53264 not found
PPMC: bus 1 epp_dir = 0
PPMC: bus 2 epp_dir = 0
PPMC: checking EPP bus 0 at port D010
Thanks for any suggestions on how to get rid of this.
Jon
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
