Yes, I KNOW, this is a REALLY old version, but just thought
I'd report it.
I'm running LinuxCNC 2.5.4 on my Bridgeport mill. I just
used it a couple days ago, everything worked
fine. I started it up today, homed, and forgot to load the
toolpath, and pressed R with the LinuxCNC
toolpath still loaded. I immediately noticed it was heading
for the wrong place and hit esc to abort it.
I then loaded the correct .ngc file, and when I pressed R,
it again headed toward (0,0).
I reloaded the toolpath several times, getting the same
response from that path and another old toolpath I tried.
Finally, I exited LinuxCNC and restarted, homed, loaded the
toolpath and all was fine.
I believe I have experienced something like this behavior
twice before, and never was able to put my finger on what
was wrong.
I am using the Axis GUI.
Yes, someday I will update this system, but it does all I
need right now, I don't do any LinuxCNC development on it,
just cut metal.
Thanks for any comments,
Jon
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
