Den 2022-02-06 kl. 16:07, skrev andy pugh:
On Sun, 6 Feb 2022 at 14:36, Jérémie Tarot <silopo...@gmail.com> wrote:
Finally, I think @turboss had started giving a try at a node based HAL
config UI... Wouldn't that be nice ?
There have been at least 4 attempts at this, but none seem to try to
carry on where the previous one left off.
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Eagle2HAL
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Crapahalic
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Rockhopper_Web_Server
https://github.com/dev-git-usr/HAL-Editor
Have done some work with gEDA gschem or later renamed to lepton
schematic. Basic idea is an extra netlist backend to generate the hal
file from the schematic, also need to make a library with symbols of course.
If doing changes to the .hal files it might be worth looking at
structural VHDL and reuse the syntax.
Nicklas Karlsson
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
