Gene, Great you are making progress. Your scripts won't work as you refer to 32 bit armhf and this is 64bit arm64 Also Buster uses Python 2.7 which was deprecated in Bullseye. Linuxcnc now uses Python 3.11 and 2.7 is not available. There should not be any missing dependencies to build linuxcnc as the image builds linuxcnc from source. If there is you will be able to install them once we sort out your network. please follow the docs to build the packages http://linuxcnc.org/docs/devel/html/code/building-linuxcnc.html#_building_debian_packages when you run the debian/configure script do it this way cd ~/linuxcnc-dev/debian ./configure uspace no-docse is once we get your network
to set a fixed Ip address, you should edit /etc/network/interfaces we don't need to touch dhcpcd.conf geany and nano editors are included Something like this but check the NIC name using ip a as it won't be eth0 auto eth0 iface eth0 inet static address 192.0.2.7/24 gateway 192.0.2.254 To set DNS servers, add something like this which will use Google's DNS servers: dns-nameservers 8.8.8.8 8.8.4.4 Ref: https://wiki.debian.org/NetworkConfiguration#Configuring_the_interface_manually To restart networking with the new settings sudo systemctl restart networking To set your host name to rpi4.coyote.den sudo hostnamectl set-hostname rpi4.coyote.den On my network, I let the router allocate IP addresses with DHCP and if a fixed IP is required, I add a DHCP reservation on the router for the specific MAC address. That way, there is no configuring of IP addresses on the device. I think I've covered everything Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Thu, 28 Sept 2023 at 04:27, gene heskett <ghesk...@shentel.net> wrote: > On 9/26/23 14:54, Rod Webster wrote: > > User cnc > > PW cnc > > Ref: > > > https://github.com/rodw-au/rpi-img-builder-lcnc/blob/linuxcnc/instructions.txt > < > https://github.com/rodw-au/rpi-img-builder-lcnc/blob/linuxcnc/instructions.txt > > > > > Further findings, looking at /etc/network/interfaces, I am advised that > for static addresses, which this is. I should consult etc/dhcpcd.conf > and man dhcpcd.conf, but neither is installed. And w/o network access, > I am DITW. I am black listed off the pi forum, seems I asked too many > realtime questions 7 years ago when I was first setting this up on a > rpi3b, which was a bit short of the power to do it smoothly as that > lathe would stop for a few milliseconds now and then waiting on orders. > The foundation officially does not support realtime. So I wound up > building my own preempt-rt kernal, and not know anything about u-boot, I > worked out a 26 megabyte tarball, the unpacked to /boot and /lib to > install that kernel, which has been happily running this rpi4 from > reboot to reboot. Months between reboots at times, dead stable. > > Right now my workspace SSD is out and a usb reader is in its usb3 > socket, so my whole linuxcnc subdir has been cp -R installed. > > > Rod Webster > > *1300 896 832* > > +61 435 765 611 > > Vehicle Modifications Network > > www.vehiclemods.net.au <http://www.vehiclemods.net.au/> > > > > > > On Wed, 27 Sept 2023 at 04:08, gene heskett <ghesk...@shentel.net > > <mailto:ghesk...@shentel.net>> wrote: > > > > On 9/18/23 23:32, Rod Webster wrote: > > > Gene, Use this link. > > > > > > https://drive.google.com/drive/folders/1Bv4ceKAa0nYwDvc5eVNYFtU24PQGjKfQ < > https://drive.google.com/drive/folders/1Bv4ceKAa0nYwDvc5eVNYFtU24PQGjKfQ> > > > I rebuilt the image last night as there was an update to the > > PREEMPT_RT > > > patch. > > > Also a 2.9 ISO for AMD64 is here > > > > > > https://drive.google.com/drive/folders/1kW9GkNFZ7eZkfQSQPkiCHNDEXyBEfdnP < > https://drive.google.com/drive/folders/1kW9GkNFZ7eZkfQSQPkiCHNDEXyBEfdnP> > > > > > What is the default pw? > > > > Cheers, Gene Heskett. > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author, 1940) > > If we desire respect for the law, we must first make the law > > respectable. > > - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/ > > <http://geneslinuxbox.net:6309/>> > > > > Cheers, Gene Heskett. > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/> > > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
