On Fri, 5 Apr 2024 at 11:59, Curtis Dutton <curtd...@gmail.com> wrote:
> I'm starting a new project to build a motor drive based upon igbt modules. > Hoping to build something that has a single type of controller that will > plug and play with various capacity igbt modules for various size motors. Are you aware of the STMBL project? That would seem like a very good starting point, as it already plays well with LinuxCNC, and works with a wide range of feedback types (Hall sensors, resolvers, encoders and serial protocols) In fact you could probably copy the LV board with only minor changes (to account for component obsolescence) and make a new HV/power board. https://github.com/rene-dev/stmbl/blob/master/README.md -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
