Hello, I also miss automated rebuilds of our documentation, which I would want to use to check the state of our translations. For the very latest content it may be worthwhile to also link to our GitHub pages. Maybe have a look at https://github.com/LinuxCNC/linuxcnc/blob/master/docs/src/gcode/tool-compensation.adoc which is a prime example of how even the images are integrated in that preview.
Best, Steffen > Gesendet: Sonntag, 15. September 2024 um 19:31 > Von: "andy pugh" <bodge...@gmail.com> > An: "EMC developers" <emc-developers@lists.sourceforge.net> > Betreff: Re: [Emc-developers] Buildbot(s) > > <html><head></head><body>On Sun, 15 Sept 2024 at 17:50, Greg C > <gregory.d.c...@gmail.com> wrote: > > > Just wanted to bump this as it was brought up on the forum today. It > seems > > the buildbot(s) have been down since July. Docs arent being built. > > 2.9 debs are still being built, but only for Buster (which went out of > LTS in July, so shouldn't be encouraged) > http://buildbot.linuxcnc.org/dists/buster/2.9-rtpreempt/ > > You are right that buildbot2 hasn't built any debs since July: > http://buildbot2.highlab.com/debian/dists/ > > I don't know what the problem is there, as the grid view (etc) don't > seem to be working at all. > > However, that said, _most_ users should be using the released > packages, rather than the development versions. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > </gregory.d.c...@gmail.com></body></html> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
