Back on topic. When I thought about this again, the GPG keys etc are correctly set up in the linuxcnc repo and I can upgrade to 2.94 using apt upgrade so it all should work Nothing has changed at all, other than a version number in a text file I have pushed a commit for 2.9.4 https://github.com/LinuxCNC/linuxcnc-live-build/pull/42 It was built successfully. If there were key errors I think they would have crashed the builder.
This image should work. once it is uploaded (give it half an hour or so) : https://drive.google.com/drive/folders/1VccMMVVq8MmUDZzG3BJtF2ip9lIf6UPs?usp=drive_link Be sure to use Debian Bookworm 12 and do an APT upgrade to the latest debian version because the Debian Live builder uses the debiian version and kernel you are using. The kernel should be 6.1.0-30-amd64 Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Mon, 27 Jan 2025 at 21:27, Robert Schöftner <r...@unfoo.net> wrote: > Am Montag, dem 27.01.2025 um 10:30 +0000 schrieb andy pugh: > > On Mon, 27 Jan 2025 at 09:52, Rod Webster <r...@vehiclemods.net.au> > > wrote: > > > > > I had an idea. You could try copying your script into this file > > > before the > > > apt update > > > > > > > https://github.com/LinuxCNC/linuxcnc-live-build/blob/bookworm/config/hooks/normal/510-linuxcnc.hook.chroot > > > At one stage I was dealing with keys in this file so it should work > > > > > > I am starting to think that it is related to the reason that you > > can't get > > to the LinuxCNC Wiki with https:// any more. > > > > I also thought that at first because ip address of wiki.linuxcnc.org > and www.linuxcnc.org is the same, but certificate served for > www.linuxcnc.org is correct and valid. wiki.linuxcnc.org still > negotiates with the generic sni.dreamhost.com certificate. > > so the cause is probably that the CA used by letsencrypt is not > recognized by the build system, or there is a problem with the > certificate chain (intermediate certificate not available?). > > > error msg from build host: > > Certificate verification failed: The certificate is NOT trusted. The > certificate issuer is unknown. Could not handshake: Error in the > certificate verification. [IP: 69.163.143.134 443] > > wget https://wiki.linuxcnc.org: > > ERROR: cannot verify wiki.linuxcnc.org's certificate, issued by > 'emailAddress=s...@dreamhost.com,CN=sni.dreamhost.com,OU=System > Engineering,O=New Dream Network LLC dba > Dreamhost,L=Brea,ST=California,C=US': > Self-signed certificate encountered. > ERROR: certificate common name 'sni.dreamhost.com' doesn't match > requested host name 'wiki.linuxcnc.org'. > To connect to wiki.linuxcnc.org insecurely, use `--no-check- > certificate'. > > > ("issuer unknown" vs. "common name doesn't match") > > > -- > Robert Schöftner <r...@unfoo.net> > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
