heh - I was surprised to see the login screen. I had not even looked at the computer from starting the install until I saw the login screen. The password turned out to be 'live'.
This is on an older Dell Optiplex XE. Circa 2010 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz 8gb ram 250gb hard drive Tried your suggestion In a terminal I changed the sources.list ran sudo apt update opened synaptic clicked reload found no files to update - probably not unusual here with no repositories specified The two sections of feedback were not a problem for me. I just thought no user interface during the software interface was unusual. thanks for your response Stuart On Tue, Jan 20, 2026 at 8:57 PM rodw <[email protected]> wrote: > This error (from reading your log) is because you have > /etc/apt/sources.list and the newer /etc/apt/sources.list.d/debian.sources > in the new deb822 format. > > Try renaming sources.list to sources.bak and doing a sudo apt update to > remove the duplicate definitions > > Is this on a raspberry pi image? Normally you need to set the password > when running the Debian live installer so its odd to me you had to guess a > password (which is set on the pi) > > > > On 2026-01-21 06:26, Stuart Stevenson <[email protected]> wrote: > > Hi, > > > > I installed Debian 13 Trixie PREEMPT-RT ISO on an empty hard drive. > > This was a totally interaction free install. I started it and left. When > I > > returned a few minutes later the login screen was showing. It took me a > few > > minutes to login. I had to guess the password. > > LinuxCNC started up just fine and ran through the example NC file. > > > > When I started Synaptic I clicked on reload and saw this message > > > > > > W: Repositories should provide a clear-signed InRelease file, but none > > found at file:/run/live/medium/dists/trixie/InRelease. > > W: Target Packages (main/binary-amd64/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (main/binary-all/Packages) is configured multiple > times > > in /etc/apt/sources.list:2 and /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (main/i18n/Translation-en_US) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (main/i18n/Translation-en) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (contrib/binary-amd64/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (contrib/binary-all/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (contrib/i18n/Translation-en_US) is configured > > multiple times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (contrib/i18n/Translation-en) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (contrib/dep11/Components-amd64.yml) is configured > > multiple times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (contrib/dep11/Components-all.yml) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > > > > > I clicked on Mark All Upgrades and clicked on Apply. > > I have this message > > > > W: Target Packages (main/binary-amd64/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (main/binary-all/Packages) is configured multiple > times > > in /etc/apt/sources.list:2 and /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (main/i18n/Translation-en_US) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (main/i18n/Translation-en) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (contrib/binary-amd64/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Packages (contrib/binary-all/Packages) is configured multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (contrib/i18n/Translation-en_US) is configured > > multiple times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target Translations (contrib/i18n/Translation-en) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (contrib/dep11/Components-amd64.yml) is configured > > multiple times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Target DEP-11 (contrib/dep11/Components-all.yml) is configured > multiple > > times in /etc/apt/sources.list:2 and > > /etc/apt/sources.list.d/debian.sources:1 > > W: Download is performed unsandboxed as root as file > > '/var/cache/apt/archives/partial/libc6-dev_2.41-12+deb13u1_amd64.deb' > > couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission > > denied) > > > > There are a few files updated and added. > > > > Seems as though the reports are largely meaningless. ? > > > > Everything seems to run just fine. I haven't tested it extensively but I > > like it so far. > > > > thanks > > Stuart > > > > -- > > Addressee is the intended audience. > > If you are not the addressee then my consent is not given for you to read > > this email furthermore it is my wish you would close this without saving > or > > reading, and cease and desist from saving or opening my private > > correspondence. > > Thank you for honoring my wish. > > > > _______________________________________________ > > Emc-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
