Ron raised my curiosity so I looked at the single CB report which we have and it only makes reference to IEC950 with no reference to EN60950.
Gabriel Roy Hughes Network Systems MD ----------------------------- Ron Pickard wrote------------------------------------------------------ Finn-Erick, I draw exception to your comments below: > A CB-test report alone would not be sufficient as it refers to an IEC-standard. For the > LVD compliance with relevant European Norm (e.g. EN 60950 for ITE) is required, > so you will need an additional report covering the differences between the > IEC-standard and the EN. A CB report/certificate may not only refer to an IEC standard. In the CB reports that I am familiar with, they all incorporate IEC950 and EN60950 into the same report along with the respective amendments in force at the time. The CB certificates indicate the standard(s) applied and which national deviations were considered/evaluated. It's important to note here that these reports came from 2 different NCBs. However, if a CB report evaluation is only to IEC950, then a separate EN60950 evaluation may be required. But if so, so much for the one-stop shopping approach as the CB Scheme touts. Comments from anyone with CB experience for clarification, especially the NCBs? Regards Ron Pickard [email protected]
