I am not sure what level of detail that you are looking for, but you might try to look at EN45001/2, and the associated guide for EMC labs that was published in the UK. Another avenue would be to model your format after the NVLAP program. They have a Handbook 150 (general) and 150-x (for specific methods (FCC, MIL)) for laboratories applying for accreditation, which may be useful.
Bob Martin Sr. Technical Manager Intertek Testing Services (978)263-2662 fax(978)263-7086 [email protected] The opinions expressed are my own and not necessarily those of my employer. -----Original Message----- From: Randall Flinders [SMTP:[email protected]] Sent: Monday, October 05, 1998 11:34 AM To: 'emc-pstc' Subject: Lab qualification Hello group. I am facing the task of writing a corporate procedure for qualifying EMC Test Labs as vendors. The procedure will approve each vendor on a test by test basis, and a spec by spec basis. (For example - one lab may be approved for radiated emissions, but not for EFT testing, while another lab may be approved for testing to FCC Part 15, but not to AS/NZS 3548.) Could anyone suggest any documents which I can use I the preparation of this procedure? If anyone has faced this task in the past, pointers would be appreciated as well. So far, the only document I have found to use as a guide is ISO Guide 25-B. Any other suggestions would be appreciated. Regards, Randy Flinders EMC Engineer Emulex Network Systems (714) 513-8012 [email protected]
<<application/ms-tnef>>
