For ON we have used filled circle with "rays" i.e. similar to IEC 417/BS6217 symbol 5056 but filled solid For OFF an open circle and no rays For flashing same as 5435 but without the corner flashes
> -----Original Message----- > From: Jim Eichner [SMTP:[email protected]] > Sent: Thursday, June 04, 1998 9:57 PM > To: 'Cortland Richmond' > Cc: 'EMC-PSTC - forum' > Subject: RE: Symbol for "flashing" > > Thanks. I had a similar thought, but I believe that under an IEC950 > type of approval, unless a symbol comes from IEC417, it cannot be used > without an accompanying explanation. > > Do I have that philosophy right? > > Regards, > > Jim Eichner > Statpower Technologies Corporation > [email protected] > http://www.statpower.com > Any opinions expressed are those of my invisible friend, who really > exists. Honest. > > > > > -----Original Message----- > > From: Cortland Richmond [SMTP:[email protected]] > > Sent: Thursday, June 04, 1998 1:47 PM > > To: [email protected] > > Subject: Symbol for "flashing" > > > > Don't know if it's an approved symbology, but one does > > come to mind. HTat's a drawing of the LED lit as having > > rays == short radiant lines == emitting from it. Dark, > > no lines. Slow flashing, a series of relatively long > > dashes, eash with a "lit" symbol over it and fast falshing, > > a series of short dashes (or even dots) each with a > > "lit" symbol. > > > > Seems to me that would be self-explanatory, but as I > > mentioned, I do not know if it is anyone's approved > > symbol. > > > > Cortland Richmond
