I would suspect that any lawyer would tell you that you should apply "due diligence", and use EN 60825-1. Regards, John Crabb, Development Excellence (Product Safety) , NCR Financial Solutions Group Ltd., Kingsway West, Dundee, Scotland. DD2 3XX E-Mail :[email protected] Tel: +44 (0)1382-592289 (direct ). Fax +44 (0)1382-622243. VoicePlus 6-341-2289.
> -----Original Message----- > From: [email protected] [SMTP:[email protected]] > Sent: 07 December 1999 21:23 > To: [email protected] > Subject: Products with high power LEDs > > > Assume a business product with a high power LED for use in the EU and that > it operates at 230V. It will be subject to the Low Voltage Directive, so > EN60950 and EN60825-1 would apply. Now assume a similar product but it > operates at 24V. The LVD would not apply in this case. What are the legal > compliance requirements for the LED output? > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
